Garage doors, just like any type of mechanised or electric tool, intermittently fail to comply with your wishes and need to be mended. If the door is down and will not go up, regardless of your physical efforts or that of your door opener, the problem is most probably a faulty spring.

There are two significant kinds of springs in garage doors. There's torsion springs that are mounted above the door opening and tension springs which are set up down each tracks. Each tension springs and torsion springs serve the same purpose, they provide a great deal of the facility that enables you or your opener to open your door.

It will likely be very hard or completely not possible to open your garage door if one of your springs is broken. This can be actually inconvenient if you are making an attempt to open your garage door to get your car out. It may be even more trying if you're going someplace important, like work.

Unfortunately for the majority of property owner, if one of your springs is damaged, there's not much to do with the exception of to call a garage door replacement business and have them come out and change the springs.

There are some repairs you can make in your garage door. One of the options of a garage door opener is that it has stop reverse lights that are designed to stop your garage door from closing if one thing is blocking its path.

If you look towards the bottom of the tracks on either side of your garage door opening, you will see a set of "eyes". They are there for your safety as well as the protection of your property and pets. If the beam is interrupted, your garage door will stop going down and begin going back up. Normally your garage door opener light may also flash.

It is feasible that the stop/reverse lights are now not pointing at each other. If this is the case, it might be possible to adjust them in order that they point in the correct direction.}

The main source for this beam to be interrupted is that there is something blocking it. Look for and take out the item that is shutting out the beam and also you're probably good to go.

It is also probable that the lenses of your stop/reverse lights are dirty or have condensation on them. That implies that the lights cannot see one another and your door won't work.

Your garage door opener unit can fail. They're normally very reliable but they do have components in them that may fail. Normally the failure of the opener is induced either by a worn gear sprocket or the logic board.

Both of these things can be fixed by the enterprising property owner if he so choses. However for both of them you may require the parts. You could be capable to purchase a gear sprocket replacment kit at one of the big field stores. For the logic board, you'll need to call the supplier of your opener.

Fortunately for the resident whose garage door has actually turned into a wall there are companies who specialize in assisting. They're completely insured and licensed and can be at your home briefly order whenever you experience a complication that's beyond your ways to fix.

Augusta GA garage door repair