Garage doors have two main types of springs. Extension springs run along the horizontal tracks on either side of your garage. They obtain their power by extending. Torsion springs go along a bar you can see above your garage door when it is closed. Torsion springs obtain their power from twisting.

It will probably be very hard or totally not possible to open your garage door if one of your springs is broken. This may be actually inconvenient in case you are trying to open your garage door to get your car out. It may be much more trying if you are going someplace essential, like work.

Unfortunately for most homeowner, if one of your springs is damaged, there's not much to do except to call a garage door replacement business and have them come out and change the springs.

This information may help you relevant webpage

But this is an item you can easily and may fix for yourself. In case you have an opener, you also have some type of interrupter device that keeps the door from closing if its course is blocked.

At the bottom of the tracks on either side of your garage door opening, you will most likely find a set of stop/reverse lights. These lights are actually a transmitter and a receiver of infrared beams. If the beam is broken your door will stop going down, reverse and go all the way back up. Generally your garage door light will flash when this happens.

It is feasible that the stop/reverse lights are not pointing at each other. If this is the case, it could be doable to adjust them so that they point in the correct direction.

The cause the stop/reverse system is there is that it stops your door from closing when something is in its path. Verify your garage door opening and remove any item which will possibly be blocking your garage door. This will most certainly prove successful.

If there's nothing clearly blocking your garage door, don't pull your hair out. There's one more thing to try. Obtain a paper wipe and clean the lenses on your stop/reverse lights. From time to time condensation or a small bug or dust particle will get on the lense and cause all your stop/reverse problems.

The culprit may very well be your garage door opener unit. Although they're remarkably reliable, things can easily fail with them. The 2 significant repair gadgets with the opener unit are the gear sprocket and the logic or circuit board.

A DIY type of home-owner can change these items, however you will want the proper parts. They are often troublesome, however not impossible to find.

For more information try this link.

Since garage doors don't fail to work very often, most people are caught unaware of what to do to get it fixed. Most people make some attempt to trouble shoot their problem before they give up and get in contact with a garage door business. Hopefully this article has given you some insight into what items you can fix yourself and what items should best be left to a professional.